The operators of the present-day CNC cuttingmachine demonstrate many of the same skills as those possessed by various traditional craftsmen. The operators of the CNC cuttingmachine include the men and women who design and make cabinets, woodwork, signs, and a whole range of metal, solid surface and plastic objects. The manufacturers who employ these operators know how important it is to have a good quality CNC cuttingmachine.
A good quality CNC cuttingmachine has a cutting table that covers the area bounded by a length of four feet and a width of eight feet. A quality table can handle satisfactorily a standard 4 x 8 plate of metal, wood, plastic, glass, or stone. A table that lacks a sufficient length or width will make it necessary for the operator to repeatedly reposition the plate. Operators of the CNC cuttingmachine refer to such repositioning as indexing.
A good basic CNC cuttingmachine does both plasma and oxyfuel cutting. Refinements on a basic cuttingmachine might provide it with the ability to perform other functions, functions such as:
-spotting holes for drilling -drilling aluminum -cutting a shape in the sides or end of tubing -routing wooden shapes.
Other modifications on a CNC cuttingmachine might be directed at installation of the equipment for laser or water jet cutting.
The selection of a CNC cuttingmachine will be primarily determined by the nature of cutting that will be performed by the machine operator. For some operations, it will be necessary to do only straight cutting. For other operations, the cuttingmachine must perform bevel cutting. Bevel cutting allows the operator to trim, reduce, shave, and pare the material in the plate.
Both types of cutting will subject the CNCcuttingmachine to a fair amount of wear and tear. The manufacturer therefore needs to purchase a machine with adequate customer support. Such support should include the availability of spare parts. An absence of spare parts could require that the electronics of the CNC cuttingmachine undergo a retrofitting.
A need for retrofitting would deprive the operator of important production time. The need for retrofitting would diminish the quantity of goods that could be sold to the consumer. The need for retrofitting leads to a decrease in the amount of time that the operator will be spending at the CNC cuttingmachine. That is why the availability of spare parts for a malfunctioning CNC cuttingmachine remains one of the two chief concerns of the manufacturer. A second prime concern is the size of the cutting table.
The operator of a CNC die cuttingmachine that needs to spend a large percent of time indexing will not have much time to spend on the actual cutting. Hence, the manufacturer will have much less product. Fewer products from the manufacturing facility translate into fewer products on the shelf. Consequently, the need for operators to spend time indexing can prove a detriment to the company’s bottom
A Bigz die cleanly cuts thick materials, including cardstock, chipboard, fabric, foam, magnet, leather, metallic foil, paper and sandpaper (in limited use). Its wider size offers you more design options...
QuicKutz cutting and embossing dies are the classiest and most stylish craft dies on the market. QuicKutz is a great way to enhance a scrapbook page, create a card, or add some flare to a school project...
Provo Craft Cricut - Personal Die-cut Machine
